Whirlpool Microwave G2 Error code, F7

Possible reasons:

1. Check door, hinge and cavity front alignment and adjust
as needed. OK
2. Check the operation of all interlock switches.
3. Check over temperature protector for the magnatron.
4. Check all Cavity Thermostats for closed circuit.
5. Unplug the oven for at least 40 seconds. If this solves
the problem. Ok, failed again after a few uses.
A. Check the Cooling Fan for proper operation or
blockage. OK
B. Check the resistance of the magnetron thermostat.
It should be 0 Ohms, replace if necessary.
6. Check that the control cable to the 1100 watt inverter
is properly connected to plug P2 on the display PCB
& Adjust or Reconnect
7. If interlock switches operate correctly, replace 1100W
inverter.

Well, I adjusted the door as it was about 1/16" off from left to right. Pulled top exhaust cover and filter then reinstalled. The error hasnt occurred since. Hope the bug stays away. Thanks for the advice, Jeff.

--------------------------------------------------------------
I believe that is a microcomputer board failure. You will have to replace this board. Website below.

I have gotten parts from "repairclinic" on line and they worked fine. I saved $600 on the last repair of an oven. Good luck.

http://www.applianceaid.com/micro_faultcodes.html#WLP

我们家的茄子

小了一点不过很好吃

用Google SketchUp做鞋柜

以为自己用CAD/CAE软件也算入门。所以觉得Google SketchUp是个小儿科的东西，而且这个东西是面向大众的。应该不用学就会，谁知磕磕碰碰折腾了好久才上手。

下面列出Google SketchUp使用注意事项：

1. 画东西（无论长方形还是线）的时候，两种方法
a) 鼠标点一下，松开移到下一位置，在点一下
b) 鼠标点一下，松开移到下一位置附近，打入尺寸数字并回车

2. 画到一半的时候如果要取消按esc键

3. 移动一条边用move，可以输入移动值大小并回车

4. 如果要copy多份物体，copy完一个后按<n>x并回车

5. 改变component中的尺寸，所以的componnet副本都更改。group则不是

6. Tape measure tool是用来画辅助线的

7. 尺寸标注后改变数值不会改变实际尺寸

8. 按下orbit后可以旋转，再按下shift可以平移。 鼠标滚轮可以放大缩小

最后添上我设计的鞋柜，好像不好看的样子，大家有没有别的idea？

485 is sent out -- Man proposes, God disposes

Finallly, finally, the 485 is sent to the lawyer by Fedex

Man proposes, God disposes

The diaper rash of the baby has been recovered!

Due to our two-day hard work of take caring of him. The diaper rash went away and away. We actually did not realize this. What we know is following what the book said, the internet says, the friends said, the parents said, the doctors said. And suddenly, this morning, when we check his diaper rash area, it going away!

This is the best news we have had recently. Our effort gets paid.

Also, we got some lessons.

1. Books always gives you more complete information than internet. So please read book
2. Internet always give you what you concern. So please also check the internet if you have any questions
3. Don't be shy of asking your PD. You paid them, and they should answer your questions.
4. Do need get more sleep, spend let time on the internet!!!

God blesses our baby!

we bathed our baby officially

Our baby was bathed officially today, especially to me.
Why it is for me only. Because I realized the baby needs/loves bath everyday since today.
poor baby!