2013年4月29日星期一

[合集] 请人安装净水器(转寄)

发信人: suannai (酸奶), 信区: Texas
标 题: [合集] 请人安装净水器
发信站: BBS 未名空间站 (Wed Mar 27 12:05:03 2013, 美东)


☆─────────────────────────────────────☆

roc999 (James Bond) 于 (Fri Sep 21 00:32:14 2012, 美东) 提到:

costco买了一个净水器,想要找人安装一下。需要在ganite灶台上面打个洞来安装
faucet。
有没有推荐的师傅?我家在Katy。

https://www.dropbox.com/s/yuc0bbq9jdeio4p/2012-09-09%2015.23.45.jpg

https://www.dropbox.com/s/tnv63lpqi5f18zd/2012-09-09%2015.24.04.jpg


☆─────────────────────────────────────☆

dager (dager) 于 (Fri Sep 21 16:42:44 2012, 美东) 提到:

钻到水盆金属部分更容易,上网搜索相关品牌安装视频做参考

☆─────────────────────────────────────☆

SLRain2011 (下点儿雨多好) 于 (Fri Sep 21 17:31:08 2012, 美东) 提到:

千万不要找德州纯水的那夫妻两个, 我们装的时候找的他们, 糟糕透了.

☆─────────────────────────────────────☆

qizhu (frank) 于 (Fri Sep 21 17:44:07 2012, 美东) 提到:

我自己装的,看了你的,应该不用打洞,把龙头左边的放下去,用那个口就是了。

☆─────────────────────────────────────☆

nxysdnqr (老强) 于 (Fri Sep 21 21:38:41 2012, 美东) 提到:

自己装! 把洗碗机那个东西挪开放净水器就行了。稍微费事儿就是在下水PVC管子上钻
个眼放废水用

【 在 roc999 (James Bond) 的大作中提到: 】
: costco买了一个净水器,想要找人安装一下。需要在ganite灶台上面打个洞来安装
: faucet。
: 有没有推荐的师傅?我家在Katy。
: https://www.dropbox.com/s/yuc0bbq9jdeio4p/2012-09-09 15.23.45.jpg
: https://www.dropbox.com/s/tnv63lpqi5f18zd/2012-09-09 15.24.04.jpg

★ 发自iPhone App: ChineseWeb - 中文网站浏览器

☆─────────────────────────────────────☆

roc999 (James Bond) 于 (Sat Sep 22 08:26:05 2012, 美东) 提到:

好的。我去研究研究。
【 在 nxysdnqr (老强) 的大作中提到: 】
: 自己装! 把洗碗机那个东西挪开放净水器就行了。稍微费事儿就是在下水PVC管

☆─────────────────────────────────────☆

nxysdnqr (老强) 于 (Sat Sep 22 14:43:47 2012, 美东) 提到:

没问题的,俺笨的连草都割不了,这个还是自个儿装的,也是Costco买的那个号称新款
的。有两三个过滤芯号称6个月一�,现在用了一年半多也没有换过,水质还很好

【 在 roc999 (James Bond) 的大作中提到: 】
: 好的。我去研究研究。

★ 发自iPhone App: ChineseWeb - 中文网站浏览器

☆─────────────────────────────────────☆

chinabear (chinabear) 于 (Tue Jan 8 13:48:43 2013, 美东) 提到:

你咋知道水质还好?

【 在 nxysdnqr (老强) 的大作中提到: 】
: 没问题的,俺笨的连草都割不了,这个还是自个儿装的,也是Costco买的那个号称新款
: 的。有两三个过滤芯号称6个月一�,现在用了一年半多也没有换过,水质还很好
: ★ 发自iPhone App: ChineseWeb - 中文网站浏览器


☆─────────────────────────────────────☆

xixipaopao (xixipaopao) 于 (Tue Jan 8 16:55:47 2013, 美东) 提到:

水槽上面应该已经开好洞了吧

☆─────────────────────────────────────☆

csthing (不得不说sth) 于 (Tue Jan 8 17:16:55 2013, 美东) 提到:


c0-ask

【 在 chinabear (chinabear) 的大作中提到: 】
: 你咋知道水质还好?


☆─────────────────────────────────────☆

nxysdnqr (老强) 于 (Wed Jan 9 00:16:01 2013, 美东) 提到:

以前买zerowater 送了个测水质的笔,还有就是口感了

【 在 chinabear (chinabear) 的大作中提到: 】
: 你咋知道水质还好?

★ 发自iPhone App: ChineseWeb - 中文网站浏览器

☆─────────────────────────────────────☆

Refreshe (Refreshe) 于 (Fri Jan 11 00:22:03 2013, 美东) 提到:

我和楼主的情况一抹一样,水龙头是在granite上面的,一直不知道要不要在GRANITE上
砖个洞。洗碗机的出水口真的可以挪开吗?能不能介绍一下怎么挪走的?

【 在 nxysdnqr (老强) 的大作中提到: 】
: 自己装! 把洗碗机那个东西挪开放净水器就行了。稍微费事儿就是在下水PVC管子上钻
: 个眼放废水用
: ★ 发自iPhone App: ChineseWeb - 中文网站浏览器


☆─────────────────────────────────────☆

Parsons (For the Lich King!) 于 (Fri Jan 11 10:10:33 2013, 美东) 提到:

挪开了以后,洗碗机还能正常使用么?谢谢了
【 在 nxysdnqr (老强) 的大作中提到: 】
: 自己装! 把洗碗机那个东西挪开放净水器就行了。稍微费事儿就是在下水PVC管子上钻
: 个眼放废水用
: ★ 发自iPhone App: ChineseWeb - 中文网站浏览器


☆─────────────────────────────────────☆

nxysdnqr (老强) 于 (Fri Jan 11 16:04:39 2013, 美东) 提到:

那个凸起台子下面有可以拧松的,拧开就把凸起推下去就行了。不过有师傅说那个凸起
主要是洗碗的时候要是有泡沫会从眼里出来,所以按下去了还是要尽量让它海拔高一些

【 在 Refreshe (Refreshe) 的大作中提到: 】
: 我和楼主的情况一抹一样,水龙头是在granite上面的,一直不知道要不要在GRANITE上
: 砖个洞。洗碗机的出水口真的可以挪开吗?能不能介绍一下怎么挪走的?

☆─────────────────────────────────────☆

nxysdnqr (老强) 于 (Fri Jan 11 16:06:00 2013, 美东) 提到:

俺不常用,挪开后洗了3,4次吧,没啥问题。你不放心就开个洞吧,也就50刀。

【 在 Parsons (For the Lich King!) 的大作中提到: 】
: 挪开了以后,洗碗机还能正常使用么?谢谢了

☆─────────────────────────────────────☆

tinaning (小熊) 于 (Sat Jan 12 00:39:20 2013, 美东) 提到:

你在哪个城市,我问了几个plumber, 单开个洞就要90到150,你问的是什么人?谢谢


【 在 nxysdnqr (老强) 的大作中提到: 】
: 俺不常用,挪开后洗了3,4次吧,没啥问题。你不放心就开个洞吧,也就50刀。

☆─────────────────────────────────────☆

nxysdnqr (老强) 于 (Sat Jan 12 01:58:28 2013, 美东) 提到:

屯子啊,问的是老中做大理石装修的

【 在 tinaning (小熊) 的大作中提到: 】
: 你在哪个城市,我问了几个plumber, 单开个洞就要90到150,你问的是什么人?谢谢

★ 发自iPhone App: ChineseWeb - 中文网站浏览器

☆─────────────────────────────────────☆

Findit007 (面包会有的) 于 (Sun Jan 13 12:50:01 2013, 美东) 提到:

给老公找到案例了。

※ 来源:・BBS 未名空间站 海外: mitbbs.com 中国: mitbbs.cn・[FROM: 173.]

Re: 求Galveston钓螃蟹的地址(转寄)

发信人: dynal (小石), 信区: Texas
标 题: Re: 求Galveston钓螃蟹的地址
发信站: BBS 未名空间站 (Mon Apr 22 13:38:52 2013, 美东)

是 Oilfield Road, Bolivar Peninsula, TX 77623 吗?
在GOOGLE map上看是条环路啊,而且看不到哪儿有桥啊?

【 在 Vertu (Mark) 的大作中提到: 】
: 17街那里周末早上人比螃蟹多,而且岩石太多,不方便进出。
: 在那周围还有一个地方,下了船,穿过17街,然后有条街叫 oilfield rd. 左转开2分
: 钟,桥下很多螃蟹,车可以停在桥旁边。

--

※ 来源:・WWW 未名空间站 海外: mitbbs.com 中国: mitbbs.cn・[FROM: 128.]

Re: 求Galveston钓螃蟹的地址(转寄)

发信人: zhongdianshi (brb), 信区: Texas
标 题: Re: 求Galveston钓螃蟹的地址
发信站: BBS 未名空间站 (Mon Apr 22 14:19:01 2013, 美东)

收藏了。谢谢!


推荐另外两个地方
1. 29.334354,-94.740752
45-87-seawall开到头,右拐大概1千米。是一个有水草的浅滩,螃蟹很多,大小都有,
应该是它们产卵、孵育基地之类的地方。
车可以停在 29.334092,-94.745295。这儿是一片沙滩,立的有块牌子,是个galveston
的city park。
附近的29.334317,-94.749852也是个钓鱼的好地方。

2. 29.75654,-95.049072
属于baytown nature center。见过劳模妇女孩子,拿鸡腿一拉就是三四只,老大个儿

这个地方距离houston比较近,只是要收钱,平时一辆车3块钱,可以买年票20。 每个
月的第一个星期天免费。旁边是一个butterfly center ,里面还有3个fishing pier。


--

※ 来源:・WWW 未名空间站 海外: mitbbs.com 中国: mitbbs.cn・[FROM: 162.]

我们的家常菜 (长贴海量图,打开会有点慢)(转寄)

发信人: littlej (sunshine), 信区: Food
标 题: 我们的家常菜 (长贴海量图,打开会有点慢)
发信站: BBS 未名空间站 (Sun Apr 28 16:12:00 2013, 美东)

已经有两年半没来food版了,以前的版友还在玩的已经很少了

最近在微薄分享的几个家常菜和一些实用的小tip,得到不少朋友、网友很好的反馈,
一些厨房新手都复制成功,我非常非常开心,甚至比自己做好还要开心!因此,想上来
和更多的人分享。

我的微薄是@小捷小婕,在标签"我们的家常菜"下,有我分享的一些食谱和做菜小窍
门。写的比较罗嗦,是希望把原理解释清楚,操作起来其实并不复杂。

这些年做菜已经从追求fancy和形似,转到追求扎实的基本功,重视细节,因为发现一个
菜的成败往往是细节决定的。比如牛肉、鸡胸肉、虾仁怎么切怎么预处理怎么上浆、用
什么样的油温才会滑嫩。

在这里先按时间顺序倒序贴一些今年和去年做的菜,具体的菜谱大家可以从微薄中寻找。

http://ww1.sinaimg.cn/large/942373d1gw1e3ziuz46cwj20c819zn37.jpg
http://ww4.sinaimg.cn/large/942373d1gw1e3enr9po1rj.jpg
http://ww4.sinaimg.cn/large/942373d1jw1e0u3ssvpmnj.jpg
http://ww1.sinaimg.cn/large/942373d1jw1e00858njykj.jpg
http://ww2.sinaimg.cn/large/942373d1jw1dzpulqxgcaj.jpg
http://ww1.sinaimg.cn/large/942373d1jw1dzpuk0sbncj.jpg
http://ww1.sinaimg.cn/large/942373d1jw1dzpuif8gnbj.jpg
http://ww1.sinaimg.cn/large/942373d1jw1dyfot47fnzj.jpg
http://ww3.sinaimg.cn/large/942373d1gw1dyfnvs808qj.jpg
http://ww3.sinaimg.cn/large/942373d1jw1dyfn4kqmbdj.jpg
http://ww4.sinaimg.cn/large/942373d1gw1dxc7axi4lnj.jpg
http://ww4.sinaimg.cn/large/942373d1gw1dxbzeefjofj.jpg
http://ww4.sinaimg.cn/large/942373d1gw1dwsclqg8y0j.jpg
http://ww2.sinaimg.cn/large/942373d1gw1dv7wuyyu3rj.jpg
http://ww4.sinaimg.cn/large/942373d1gw1duu12cbzfaj.jpg

粤菜--腊味芋头糕
http://farm9.staticflickr.com/8516/8368871375_190be029f0_b.jpg

浙菜--油爆大虾
http://farm9.staticflickr.com/8219/8368872251_fbb19fb08e_b.jpg

闽菜--十香排骨串
http://farm9.staticflickr.com/8503/8344117567_4f29ae68fc_b.jpg

闽菜--煎糟鳗鱼
http://farm9.staticflickr.com/8071/8344117789_635bdb7184_b.jpg

crab cake
http://farm9.staticflickr.com/8353/8345178772_7397417365_b.jpg

浙菜--芙蓉鱼片
http://farm9.staticflickr.com/8075/8345179196_8e8f874832_b.jpg

Escargots de Bourgogne(Snails with Herb Butter)勃艮第蜗牛
http://farm9.staticflickr.com/8503/8344119609_f66b47661a_b.jpg

巧克力黑莓慕斯蛋糕
http://farm9.staticflickr.com/8079/8344261899_e6cf58de9a_b.jpg

芋头酥
http://farm9.staticflickr.com/8363/8311570947_e346d28ce0_b.jpg
http://farm9.staticflickr.com/8500/8312620548_f3dc082634_b.jpg

浙菜--蟹酿橙
http://farm9.staticflickr.com/8361/8289592237_d4f644c0d8_b.jpg

川菜--二姐兔丁
http://farm9.staticflickr.com/8072/8289592361_064bca3a60_b.jpg

川菜--陈皮牛肉
http://farm9.staticflickr.com/8357/8286369878_2a405eaa4d_b.jpg

鲁菜--溜肝尖
http://farm9.staticflickr.com/8500/8286372250_3a1874d1d3_b.jpg

新疆菜--大盘鸡
http://farm9.staticflickr.com/8362/8271989344_b00cf07ffa_b.jpg

波隆那肉酱意面Tagliatelle with ragù Bolognese sauce (Tagliatelle al ragù
alla Bolognese)
http://farm9.staticflickr.com/8060/8286373416_47f869bb6c_b.jpg

上海菜--八宝鸭
http://farm9.staticflickr.com/8217/8262938170_f7c19b4b89_b.jpg

抹茶慕斯蛋糕
http://farm9.staticflickr.com/8058/8184857620_edeaeb867e_b.jpg

新疆菜--羊肉手抓饭
http://farm9.staticflickr.com/8473/8143414583_bd037b0985_b.jpg

栗子慕斯
http://farm9.staticflickr.com/8194/8135723669_5aa548d2df_b.jpg

上海菜--走油蹄膀
http://farm9.staticflickr.com/8327/8135712747_a3b9a48996_b.jpg

闽菜--福州鱼丸
http://farm9.staticflickr.com/8186/8076281474_bd4b206698_b.jpg

京菜--卤煮火烧
http://farm6.static.flickr.com/5227/5663617280_a1f54b030e_b.jpg

粤菜--腊鸭煲仔饭
http://farm9.staticflickr.com/8174/8052855782_9256fd1ae6_b.jpg
http://farm9.staticflickr.com/8449/8052849763_4828eeb8e5_b.jpg

苏菜--榨菜鲜肉月饼
http://farm9.staticflickr.com/8456/8046299336_afcd586136_b.jpg

川菜--豆花牛肉
http://farm9.staticflickr.com/8460/8028719565_2e3efe31c4_b.jpg

粤菜--蚝油牛肉
http://farm9.staticflickr.com/8445/8002125777_aa64808ef8_b.jpg

川菜--宫保鸡丁
http://farm9.staticflickr.com/8451/8005277414_c1ec46322f_b.jpg

川菜--麻辣小龙虾
http://farm9.staticflickr.com/8313/7919685224_d8ab960303_b.jpg

台湾小吃--凤梨酥/凤凰酥
http://ww2.sinaimg.cn/large/942373d1gw1dulx5mpznkj.jpg

http://ww4.sinaimg.cn/large/942373d1gw1e1lhvzmc07j.jpg
http://ww1.sinaimg.cn/large/942373d1gw1e1x9328gx2j.jpg
http://ww1.sinaimg.cn/large/942373d1gw1dwibu0009nj.jpg
http://ww4.sinaimg.cn/large/942373d1gw1dw54qx0eosj.jpg

--
坚韧而纤细
清丽而灵动

※ 修改:・littlej 於 Apr 29 00:20:24 2013 修改本文・[FROM: 98.]
※ 来源:・WWW 未名空间站 海外: mitbbs.com 中国: mitbbs.cn・[FROM: 98.]

2013年4月27日星期六

How to stop people from leaving messages in your Google Voice voicemail box » TechNotes

How to stop people from leaving messages in your Google Voice voicemail box » TechNotes


How to stop people from leaving messages in your Google Voice voicemail box

This is an edited version of a post that originally appeared on a blog called The Michigan Telephone Blog, which was written by a friend before he decided to stop blogging. It is reposted with his permission. Comments dated before the year 2013 were originally posted to his blog.
One irritating thing about Google Voice is their voicemail – they must be really proud of it, because they give you no way to turn it off (at least not that I can find), and worse yet, they don’t even let you pick the timeout before your Google Voice calls go to voicemail.  If people actually had to pay for their service I’m sure they’d get boatloads of complaints, but since it’s free and since Google doesn’t seem to care much what users think, we are stuck with their voicemail whether we want it or not. However, there are some situations where you really don’t want to have to check Google’s voicemail, so how do you discourage people from leaving a message?
The answer is simple, and probably 99.9% effective: Change your greeting to a busy signal! Most people, and even most automated calling equipment, will hang up after receiving a busy signal, and will not leave a message (and if anyone does, it’s probably a stupid robo-caller that you can safely ignore).
So how do you change your greeting in Google Voice? Glad you asked…
To start with, download this audio file (right-click on the link and save it to your hard drive). It is 24 seconds of North American busy signal, followed by the DTMF # button (the latter is needed to signal the end of the greeting).
Now, what you have to do is go to your Google Voice settings, Voicemail & Text tab, and in the Voicemail Greeting section click on “Use phone to record a new greeting.” I suggest you try this once or twice just to get the hang of how it works (you can delete any recording you make on the same page). Note that once you’ve recorded your first greeting, the button will change to say just “Record new.”

Google Voice - Location of "Record New Greeting" button
Now, the obvious thing to do here is to hold the phone up to your computer’s speaker and play the audio file after Google calls you to record the greeting. If you’re careful about your volume levels it might work, but I don’t recommend it.
A better method is to temporarily redirect your Google Voice callback so that it comes to a softphone on your computer, preferably one that has the ability to select audio inputs and outputs.  How to do that is left as an exercise for the reader, but I can tell you that the free version of Zopier will allow you to select inputs. You’ll also need an audio program that can play back .wav files and allows you to select outputs (an example for the Mac would be Vox), and depending on your computer, you may need a third piece of software that allows you to redirect the output of one program to the input of another (for example, on a Mac you can use Soundflower). On a Mac you’d go into the audio player preferences, set the output to go to the redirection software, then set the softphone to get its audio input from the redirection software.

Vox audio player output settings

Zoiper softphone audio input settings
After doing this, get Google Voice to call your softphone, answer the call and immediately click “play” on the audio player software (into which you will have pre-loaded the audio file) and if all goes well it will play the file and at the end, after the DTMF # tone is played, Google Voice should play back the file, and ask you to accept it or try again. If you hear some ringing tone in the playback prior to the busy signal, just click “2″ on Zoiper’s touch-tone keypad to try again (when you are given that option) and then as soon as you hear the beep, click “play” again. When it’s right, click the “1″ on Zopier’s touch tone keypad when given the option. You can confirm that this is set as the default from the Google Voice page mentioned above. Also, note that by using the Google Voice “Groups” feature, you can play this “greeting” only to certain callers, if for some reason you want some people to actually be able to leave you voicemail in your Google Voice voicemail box.
I know that Zoiper is cross-platform and can be used under all major operating systems, and I’m pretty sure there are audio redirection programs available for Windows and Linux, though I don’t know what they are called offhand (if you do, please feel free to leave a comment, provided the software you suggest is free to use — I’m not going to promote any commercial software for this purpose because I’m pretty sure there is free software available, and in any case, it may even be possible to achieve this function from the Windows sound control panel, but it’s been so long since I’ve tried to do anything like this in Windows that I don’t remember how it’s done, I just know it’s possible).

2013年4月15日星期一

transmission rebuilt自己弄只用1000不到(转寄)

发信人: wushupanda (武功熊猫), 信区: Automobile
标 题: transmission rebuilt自己弄只用1000不到
发信站: BBS 未名空间站 (Mon Apr 15 10:47:18 2013, 美东)

美国人工实在是太贵了。 关键是让他们修严重还不放心。

自己长本事,除了frame damage,没有修不好的车。 一辆车真正不能开了,只能是在市
场上买不到零件的那一天。

不到1000块钱,几个周末,就能有个基本新的auto tranny。

还是专业论坛给力。 要什么信息有什么信息。

http://forum.e46fanatics.com/showthread.php?t=934274

the cost of rebuilding a transmission yourself is very low. You can buy a
basic rebuild kit for less than $200. For less than $1000 you can pretty
much end up with a brand new transmission. I can't understand why
transmission shops charge so much. I saw a thread once from a bloke who said
that he had to pay about $5000 for a reverse drum replacement. This seems
pretty incredible when the part only costs about $150. I'm clearly missing
something.


--

※ 修改:・wushupanda 於 Apr 15 10:51:20 2013 修改本文・[FROM: 159.]
※ 来源:・WWW 未名空间站 海外: mitbbs.com 中国: mitbbs.cn・[FROM: 159.]

2013年4月14日星期日

[分享]抛砖引玉-我家网络电视的历史[Chinese In North America(北美华人e网)]

[分享]抛砖引玉-我家网络电视的历史[Chinese In North America(北美华人e网)]

[分享]抛砖引玉-我家网络电视的历史  发贴心情 Post By:8/31/2012 5:39:00 PM 

写这个既不是推荐什么产品,也不是教程,本意就是抛砖引玉,对于不太了解的人,可以知道一些知识,对于有经验的人也可以有个机会引来玉啦。

很早以前的原始蒙昧时期,没有高清机也没有高清电视,我们的做法是装xp的PC通过S-video端口接老式的CRT电视,然后运行PPlive。那个效果放在现在肯定是不值一提。图片点击可在新窗口打开查看

再后来有了高清电视,于是把电脑升级到了WIN7,端口也变成了HDMI,开始进入高清时代。不过因为我们电视看得很少,所以PPS什么软件统统没装,倒是配了卡拉OK双屏点歌系统,在淘宝买了一个10寸播放器作为点歌屏,配一个联想remote键盘鼠标控制。在开party的时候受到一致好评。图片点击可在新窗口打开查看
图片点击可在新窗口打开查看
图片点击可在新窗口打开查看

后来后知后觉的知道了高清机这个东西,果断买了2台PBO,这里说一下高清机,这个也就是大家讨论的机顶盒。简单的说就是一边接网络一边用HDMI输出到电视上。高清机按芯片分有3大类,realtek芯片,sigma芯片和ARM芯片。如果不是这些主流芯片的一般不推荐。
realtek芯片比较低档,比如前2年热卖的pbo就是realtek 1073芯片的。因为这种芯片已经停产,所以市面上已经几乎看不到PBO了。前两天看见Local的frys在以25刀价格清仓。
图片点击可在新窗口打开查看

Sigma芯片是主流蓝光机用的解码芯片,所以在音质画质上讲都比realtek的好些。
具体每种芯片的优劣讲解可以看这个帖子 http://www.hdpfans.com/article-158-1.html
从淘宝购买美如画或者海美迪,要看清楚用的是什么芯片。

至于用ARM芯片的,很多其实是android播放器,因为有一个通用操作系统,所以可扩展性应该要好,可能可以安装自己需要的APP游戏。不像用realtek或sigma的高清机,如果没有一个功能,比如PPS,你就一点办法没有。如果运气好等到下一个版本的固件支持了,你还要手动刷固件。但是对于ARM芯片+GPU的解码能力我还是有怀疑的,我怀疑其音质画质应该比不过sigma.

PC机这个方面也没有因为有了高清机就被冷落。我们家ZT发疯,100多刀买了一台ACER AR1600 nettop,大小只有一本字典的size,非常安静,功耗也极低,idle的时候才7W。
图片点击可在新窗口打开查看


这个小东西被我们装了XBMC 11 Eden,装好后界面差不多是下面的样子

图片点击可在新窗口打开查看

装了中文ADDON以后,中文节目就解决了,又安装了ICEFILMS add-on,于是各种美剧也完美解决。
这里多说两句XBMC,这个是专门为HTPC (Home Theater PC) 开发的操作系统,功能相当的强大。我们那台硬件很差的nettop也可以完美的跑高码率的1080P电影。另外10块钱的MCE remote配一个,就可以很省心地操作XBMC.

再往下,我们打算进入android时代,为此ZT又买了MK802 MiniPC,这小东西真心是小,价钱也不到50美元,速度却可以和主流的tablet相媲美。不过这个我们还没有怎么玩,现在还不好说有什么优缺点,至少一个优点是可以带着出去旅游,在旅馆房间里也可以看国内电视节目,或者玩下载的游戏。

图片点击可在新窗口打开查看

实用电脑:这个才是目前最便宜的手机Prepaid计划! - 由sailfish发表 - 文学城

实用电脑:这个才是目前最便宜的手机Prepaid计划! - 由sailfish发表 - 文学城

刚刚从欧洲过来的公司,进军北美市场,也是用的TMobile网络:

http://www.lycamobile.us/draft1-en/national-plans

2c/minute
4c/text 
6c/MB

还有19刀,29刀和39刀的包月计划,并且还有免费打中国(和其他几十个国家)!而且SIM卡免费寄送。

Too Good Too Be True!但是至少现在有人用了还不错。

严重推荐,但是不负责任啊,哈哈~~

P.S. 订购SIM卡的系统超级弱智,我费了半天劲总算搞了两个~

2013年4月4日星期四

Internet Explorer Automation using Excel VBA

Internet Explorer Automation using Excel VBA


IE (Internet Explorer) Automation using Excel VBA



Example below tries to give web automation using IE (internet explorer). VBA macro drives internet explorer using its DOM properties and methods. The macro allows to interact with web page controls (text fields and buttons). The example opens web site www.excely.com and fill a search form to find "excel vba" text.
First we open manually web site and found html-code of search form:
<!-- searchbox START --> 
<div id="searchbox"> 
<form action="http://www.excely.com" method="get"> 
    <div class="content"> 
        <input type="text" class="textfield" name="s" size="24" value="" /> 
        <input type="submit" class="button" value="" /> 
    </div> 
</form> 
</div>
To automate searching we need:
  • Create Internet Explorer object
  • Load web site www.excely.com
  • Find 2 input tags:
    • Text field
      <input type="text" class="textfield" name="s" size="24" value="" />
    • Button
      <input type="submit" class="button" value="" />
  • Set searching text and click button
  • Wait while IE loading
  • Clean up objects
IE Autiomation source code:
Private Sub IE_Autiomation()
    Dim i As Long
    Dim IE As Object
    Dim objElement As Object
    Dim objCollection As Object
 
    ' Create InternetExplorer Object
    Set IE = CreateObject("InternetExplorer.Application")
 
    ' You can uncoment Next line To see form results
    IE.Visible = False
 
    ' Send the form data To URL As POST binary request
    IE.Navigate "http://www.excely.com/"
 
    ' Statusbar
    Application.StatusBar = "www.excely.com is loading. Please wait..."
 
    ' Wait while IE loading...
    Do While IE.Busy
        Application.Wait DateAdd("s", 1, Now)
    Loop
 
    ' Find 2 input tags:
    '   1. Text field
    '   <input type="text" class="textfield" name="s" size="24" value="" />
    '
    '   2. Button
    '   <input type="submit" class="button" value="" />
    
    Application.StatusBar = "Search form submission. Please wait..."
 
    Set objCollection = IE.document.getElementsByTagName("input")
 
    i = 0
    While i < objCollection.Length
        If objCollection(i).Name = "s" Then
 
            ' Set text for search
            objCollection(i).Value = "excel vba"
 
        Else
            If objCollection(i).Type = "submit" And _
               objCollection(i).Name = "" Then
 
                ' "Search" button is found
                Set objElement = objCollection(i)
 
            End If
        End If
        i = i + 1
    Wend
    objElement.Click    ' click button to search
    
    ' Wait while IE re-loading...
    Do While IE.Busy
        Application.Wait DateAdd("s", 1, Now)
    Loop
 
    ' Show IE
    IE.Visible = True
 
    ' Clean up
    Set IE = Nothing
    Set objElement = Nothing
    Set objCollection = Nothing
 
    Application.StatusBar = ""
End Sub

IE Automation Library and Web Macro Recorder: Excel and IE automation - the WSH way

IE Automation Library and Web Macro Recorder: Excel and IE automation - the WSH way



Excel and IE automation - the WSH way

I can think of two possible scenarios when automating Excel and Internet Explorer makes any sense:
  • you have data stored in Excel sheets and you want to push data into online web forms.
  • you need to extract data from web and save them into Excel xls file.
There are two ways to implement this:
  • automate Internet Explorer browser from Excel VBA macro.
  • automate both IE and Excel from an external process using OLE automation.
Today I will talk about the second option; I will automate both Internet Explorer and Excel application from a WSH script using Twebst Automation Studio. Here's a diagram showing the work-flow:


Fill out web forms with Excel data

The WSH web macro in this tutorial opens an XLS file containing phrases to be translated using Google Translate tool. It then automatically gets each phrase, opens an IE browser, navigates to translation page, fills out the text to be translated, press submit button, gets back the result and saves it into the same XLS file.
That's all for now! (as I try to keep articles relatively short) Meanwhile, you should download Twebst Automation Studioand the web macro sample to see it at work. Then, you can continue with the next article explaining the web macro code and comments: Extract web data into Excel.Application with browser macro

11-19的乘法口诀,开眼界了 (转载)(转寄)

发信人: sunnyshen (sunnyshen), 信区: Texas
标 题: 11-19的乘法口诀,开眼界了 (转载)
发信站: BBS 未名空间站 (Thu Apr 4 10:12:59 2013, 美东)

【 以下文字转载自 afterschool_k12 俱乐部 】
发信人: sunnyshen (sunnyshen), 信区: afterschool_k12
标 题: 11-19的乘法口诀,开眼界了
发信站: BBS 未名空间站 (Thu Apr 4 10:10:18 2013, 美东)

当中国妈妈因为小朋友会背99乘法高兴的同时,印度小孩已经在背1919乘法了!
难怪近几年印度进步得那么快~
印度的九九表是从1背到19(→19X19乘法?),不过您知道印度人是怎么记
11到19的数字吗?
我是看了下面这本书之后才恍然大悟的。

印度式计算训练 」
请试着用心算算出下面的答案:
13X12=?
(被乘数)(乘数)
印度人是这样算的。
第一步:
先把(13)跟乘数的个位数(2)加起来,
13+2=15
第二步:
然后把第一步的答案乘以10 (也就是说后面加个0)
第三步:
再把被乘数的个位数(3)乘以乘数的个位数(2),
2X3=6
(13+2)X10+6=156
就这样,用心算就可以很快地算出11X11到19X19了喔!
这真是太神奇了!
我们试着演算一下:
14×13:
(1)14+3=17
(2)17×10=170
(3)4×3=12
(4)170+12=182

16×17:
(1)16+7=23
(2)23×10=230
(3)6×7=42
(4)230+42=272

19×19
(1)19+9=28
(2)28×10=280
(3)9×9=81
(4)280+81=361
真的好简单喔!怎不早点让我们知道呢?

--
=================================================================
欢迎大家参加 "子女课后活动" 俱乐部
子女的成功,才是我们最大的成功
http://www.mitbbs.com/club_bbsdoc/afterschool_k12.html
=================================================================


※ 来源:・WWW 未名空间站 海外: mitbbs.com 中国: mitbbs.cn・[FROM: 76.]

更改Microsoft Excel主窗口标题栏中显示的名称(VBA) - V.S.林的日志 - 网易博客

更改Microsoft Excel主窗口标题栏中显示的名称(VBA) - V.S.林的日志 - 网易博客


更改Microsoft Excel主窗口标题栏中显示的名称(VBA)  

2010-04-25 12:04:42|  分类: V.S.EXCEL_VBA|字号 订阅
更改Microsoft Excel主窗口标题栏中显示的名称(VBA
[ V.S.林 原创,转载请注明出处 ]

代码1

Sub chcap()
  Application.Caption = "V.S.EXCEL_VBA"
End Sub

运行结果:
 更改Microsoft Excel主窗口标题栏中显示的名称(VBA) - V.S.林 - V.S.林 V.S.EXCEL

代码2

Sub chcap()
  Application.Caption = vbNullChar
End Sub

运行结果:
 更改Microsoft Excel主窗口标题栏中显示的名称(VBA) - V.S.林 - V.S.林 V.S.EXCEL

代码3

Sub chcap()
  Application.Caption = vbNullString
End Sub

运行结果:
 更改Microsoft Excel主窗口标题栏中显示的名称(VBA) - V.S.林 - V.S.林 V.S.EXCEL

[  V.S.林 原创,转载请注明出处 ]
 评论这张
转发至微博

2013年4月3日星期三